The PowerPro EL ranges are Static Inverter Systems designed specifically for emergency lighting applications according to European BS EN50171 specification.
The PowerPro EL200 Series is a high performance range of Static Inverters manufactured with the state of the art PWM and IGBT technology producing microprocessor controlled pure sinewave output to critical emergency lighting loads.
EL200 models are design to provide three phase input and output as required by the latest European EN 50171 specification for Emergency Lighting. The significant advantage of using PowerPro EL Static Inverters for Emergency Lighting is the ability to supply tightly regulated and controlled sinewave power to a wide range of normal functional or decorative mains luminaires as emergency fittings.
EL200 models have three phase rectifiers with "Soft Start" control incorporating thyristor controlled bridge circuitry to limit inrush current and prevent overloading marginally rated mains supplies. These models provide an excellent solution for higher power, three phase loads and can also reduce the need for extensive re-cabling during installation.
All PowerPro EL Static Inverters are simple and easy to install with all input and output terminals conveniently positioned with front access, ensuring ease of positioning, trouble free installation and maintenance. Low MTBF (mean time between failure) and low MTTR (mean time to repair) are both fundamental to the PowerPro EL design.
|MODEL||EL 210||EL 215||EL 220|
|Power Rating kVA / kW||10 / 7||15 / 10.5||20 / 14|
|Nominal Voltage||400 Vac (3Ph + N + PE)|
|Frequency Range||50Hz +5%|
|Nominal Voltage||230 Vac (1Ph + N + PE)|
|AC Voltage Regulation||+1%|
|Harmonic Distortion (Linear Load)||<3%|
|Transfer Time||<0.5 secs="" td="">|
|Overload||120% continuous, 120 - 150% for 10 mins, 150 - 180% for 1 min|
|Mode Operation||Changeover or Inverter selectable|
|Maintained / Non-Maintained||Maintained (standard) / Non-Maintained (optional)|
|Battery Type||VRLA AGM Sealed Lead Acid Maintenance Free Batteries / Nickel Cadmium Batteries / Plante Batteries|
|Internal / External||1 or 3 hour external|
|End of Life to EN50171||Included|
|Charge Battery to 80% within 2 hours||Included|
|Deep Discharge Protection||Included|
|DC Earth Leakage||Optional|
|LIGHTING CONTROL INTERFACE|
|External Mains Fail Test Connection||Included|
|Non-Maintained Mode Connection**||Included|
|External Phase Fail Connection**||Included|
|24Vdc Supply for External Contactor||Included|
|Volt Free Contacts||2|
|Operating Temperature||0 - 40°C|
|Operating Humidity||10 - 90% (non-condensed)|
|Acoustic Noise||<60db 1="" metre="" td="">|
|Dimension (mm) WxDxH (Excluding Batteries)||545 x 730 x 1250|
|Net Weight (kgs) (Excluding Batteries)||250|
|** Only applicable if Non-Maintained Option fitted|